Products
Products
SD-BMV Series Filter Module
Use occasion Fully automatic reactive power compensation, can be installed directly. It is used for centralized compensation of reactive power in three-phase power grid with serious harmonic pollution. Upper limit of harmonic pollution in use: U3 max.0.5%, U5 max.5%,U7 max.4%.
Product Description
SD-BMV Series Dynamic Compensation Module
Use occasion
· Fully automatic reactive power compensation, can be installed directly.
· It is used for centralized compensation of reactive power in three-phase power grid with serious harmonic pollution.
· Upper limit of harmonic pollution in use: U3 max.0.5%, U5 max.5%,U7 max.4%.
Standard
Technical standards: EN60439-1, EN60831-1, IEC439-1
Operating conditions
Rated voltage: 230V-690V
Rated frequency: 50Hz/60Hz
Withstand voltage test: according to the standard
Cooling method: forced air cooling
Ambient temperature:-15 to 50°C (65°C high)
Altitude:<2000m a.s.l.(≤ 5000m optional)
Relative humidity: 10…95% (no condensation allowed)
Installation conditions: indoor installation. For outdoor installation, please contact us
Design
SD-BMV®Dynamic reactive power compensation and harmonic control integrated drawer module
Fully automatic control, thyristor switch switching
Capacitor UN = 480V, Overcurrent Capability: 1.5In
Single cabinet kit, IP00, without cabinet body.
Warranty period: 30 months
Reactivity rate: 5.67%,7%,8%,14%
Rated voltage: 230~690V (within 8 hours per day max. + 10%)
Protection grade: IP20 or IP00; For IP54, please contact us.
Temperature rating: -20/B (24 hours average temperature 35 ℃). For higher, welcome to inquire.
Modular components
· High-load, gas-filled, low-loss, self-healing capacitors with over-pressure protection.
· Vertical busbar system with low voltage fuse protection
· Thyristor switching switch
· Filter reactor, with temperature monitoring, low loss, full vacuum impregnation.
· Temperature monitoring
Previous Page
Next Page
Previous Page
Next Page