Products

Products


+
  • 中高压--电抗器.jpg
  • 高压限流电抗器-.jpg
  • 高压限流电抗器.jpg

SDrH High Voltage Iron Core Dry Series (Filter) Reactor

High-voltage reactive power compensation reactor, also known as tuning reactor or filter reactor, is generally used in series with the capacitor, applied to the power reactive power compensation system, to achieve the target induced current, with improve the power factor and suppress the wipe wave current and other functions. The product is widely used in power grid, metallurgy, petrochemical and other fields, as well as urban network substation, underground substation and microcomputer control substation and other places.

Product Description

high voltage reactive power compensation reactor

High-voltage reactive power compensation reactor, also known as tuning reactor or filter reactor, is generally used in series with the capacitor, applied to the power reactive power compensation system, to achieve the target induced current, with improve the power factor and suppress the wipe wave current and other functions. The product is widely used in power grid, metallurgy, petrochemical and other fields, as well as urban network substation, underground substation and microcomputer control substation and other places.

 

Standard

Compliance Follow: EN60076-6

 

Operating conditions

Rated voltage: 3kV to 35kV

Rated frequency: 50Hz/60Hz

Withstand voltage test: according to the standard

Cooling method: natural air

Ambient temperature:-25 to 50 ℃

Altitude: ≤ 1000m a.s.l. (≤ 5000m optional)

≤ Humidity: 95%

Protection grade: IP00 indoor installation

Allowable harmonic content: U3 = 0.5%;U5=5%;U7 = 5%.

 

Design

Inductance tolerance: 0/+ 10% (or +/-3% optional)

Reactivity rate: 5%-14%

Linearity: 1.55-2.2In

Insulation grade: H

Design: single-phase or three-phase, dry core, multi-air gap

Coil Material: Copper/Aluminum

Temperature control switch: 135 ℃, normally closed (optional)

Outlet mode: copper bar

 

 

high voltage current limiting reactor

High-voltage current-limiting reactors, also known as surge suppression reactors or damping reactors, are usually used in systems to protect equipment from surge short-circuit currents, and have the function of limiting peak inrush currents in switches.

 

Standard

Compliance Follow: EN60076-6

 

Operating conditions

Rated voltage: 3kV to 35kV

Rated frequency: 50Hz/60Hz

Rated current: 25A-3200A

Withstand voltage test: according to the standard

Cooling method: natural air

Ambient temperature:-25 to 50 ℃

Altitude: ≤ 1000m a.s.l.(≤ 5000m optional)

≤ Humidity: 95%

Protection grade: IP00 indoor installation

 

Design

Inductance tolerance: + 20% (or + 10% optional)

Insulation grade: H

Design: single-phase, dry core

Coil Material: Copper/Aluminum

Outlet mode: copper bar